Advanced Neck Ice Cooling Fan — Semiconductor Cooling Technology. MistAirHome OEM Factory.
Customer Service Hotline:
+8613261677119
Advanced Neck Ice Cooling Fan — Semiconductor Cooling Technology. MistAirHome OEM Factory.+8613261677119
TL;DR - The Mistairhome WL-AH04D (PRO) holds 260 mL and mists 27 mL per hour or 12.2 mL per hour, which is 9.6 hours and 21.3 hours per fill; the oil side takes 2.0 mL and runs 7.7 hours per fill at 0.26 mL per hour; it covers 10 sq m (104 sq ft) at a 2.6 m ceiling and measures 24.1 dB on the high step and 22.0 dB on the sleep step; it draws 2.0 W and takes its supply from USB-C 5V/0.5A; two drops on the cotton pad under the lid, which is the whole routine; the humidistat holds target band 40 to 70 percent in 5 percent steps, held within 4 percent over Bluetooth Low Energy to the phone, no router needed, and phone becomes the display for mist, light and the two to eight hour timer, no voice path on this chassis; 1300 mAh lithium polymer, giving 4.0 hours per charge on the low mist step; it weighs 222 g and measures 8.8 x 8.8 x 14.2 cm, and ships documented to CE / RoHS / FCC standards for import into Bangladesh. MOQ is 200 units per SKU with a 20-30-day lead time, FOB Shenzhen or EXW Longgang.
China Wanlin supplies the Office Aroma Humidifier Top Fill category as a direct manufacturer, not as a trading intermediary. The unit described below is one configuration out of 24 combinations (8 chassis x 3 SKU builds) that share a common misting family, a common oil path and a common documentation set, so a distributor can build a coherent shelf from one source rather than stitching together unrelated suppliers. Every unit referenced on this page corresponds to a specific bill of materials held on file, so the figures below can be reproduced or independently verified at sample stage.
The scent path is the part that separates this range from a humidifier with a few drops poured into the tank. The oil sits in its own tray or pad above the water line, on seals rated for citrus and resin blends, so the disc, the tank and the gasket never contact the oil. That is what keeps a scented unit serviceable for years rather than seasons, and it is the first thing we ask a buyer to check on a competitor sample.
Full specification of WL-AH04D-PRO:
| Misting method | Ultrasonic piezo micro-disc at 2.4 MHz with a capillary feed |
| Tank capacity | 260 mL |
| Mist output on the high step | 27 mL per hour |
| Mist output on the low step | 12.2 mL per hour |
| Run time per fill on the high step | 9.6 hours |
| Run time per fill on the low step | 21.3 hours |
| Coverage area | 10 sq m (104 sq ft) at a 2.6 m ceiling |
| Noise at 1 m on the high step | 24.1 dB |
| Noise at 1 m on the sleep step | 22.0 dB |
| Scent delivery method | Two drops on the cotton pad under the lid, which is the whole routine |
| Oil tray capacity | 2.0 mL |
| Oil contact parts | Cotton pad in a PP holder, replaced rather than washed |
| Scent intensity control | Two steps, and the scent is weak by design because the room is a metre away |
| Scent run time per tray fill | 7.7 hours |
| Oil use per hour | 0.26 mL per hour |
| Water type | Distilled recommended; a fine-pitch disc scales quickly on hard water |
| Mineral dust handling | Cartridge not fitted at this size; distilled water is the answer |
| Fill method | Screw base, filled at a sink, sealed for packing in a bag |
| Battery pack | 1300 mAh lithium polymer |
| Cordless run time | Up to 4.0 hours per charge on the low mist step |
| Charge time | 3.5 hours from empty |
| Power input | USB-C 5V/0.5A |
| Rated power on the high step | 2.0 W |
| Control interface | Single button with two steps, plus scent and light from the phone |
| Network link | Bluetooth Low Energy to the phone, no router needed |
| App platform | phone becomes the display for mist, light and the two to eight hour timer |
| Voice assistant support | no voice assistant at this size |
| Humidistat range and accuracy | target band 40 to 70 percent in 5 percent steps, held within 4 percent |
| Scheduling | Two to eight hour run timer with a daily repeat option |
| Night light | Flame-effect LED behind a frosted shell, switchable to a fixed warm tone |
| Protection | Dry-run shut-off, sealed cap with a silicone valve, cell overcharge cut-out |
| Dimensions | 8.8 x 8.8 x 14.2 cm |
| Weight | 222 g |
| Warranty | 12 months |
| Shipped kit | Pro build, + spare misting disc + demineralisation cartridge + 5 oil pads + multilingual manual |
| Units per master carton | 80 |
| Lead time | 20-30 days |
The strongest pull in Bangladesh now comes from hospitality, retail and facilities buyers rather than households, because they can put a number on complaints, on dwell time and on room-turn minutes, which makes the decision easy to defend internally. Channel structure follows a stable pattern: importers take container volumes, regional distributors break bulk into pharmacy, hospitality and gift supply, and online sellers absorb the mixed-SKU remainder that suits catalogue breadth.
Distributors handling Office Aroma Humidifier Top Fill lines consistently find that the repeat revenue sits in the consumable, in cartridges, pads and replacement discs, and increasingly in the oil itself, rather than in the appliance. This is why the table above states figures by model rather than by marketing tier: a buyer comparing two SKUs needs the noise on the sleep step, the run time per fill and the oil handling side by side, because those three predict both satisfaction and return rates better than any other set.
Wanlin serves Bangladesh through three programmes that suit different balance sheets. New partners start with sample evaluation then a mixed trial order. Established distributors move to scheduled container shipments with locked pricing windows. Brand owners run private-label programmes with their own artwork and manuals. In all three cases the factory documentation, including the certificates and oil declarations listed further down this page, references the specific model code on the order rather than a generic family certificate, which is the most common cause of customs delay in this category. On the WL-AH04D (PRO) the figures worth carrying into the next order are the 260 mL tank, the 7.7 hours of scent per oil fill, and the 22.0 dB reading on the sleep step.
The decision that matters most in this category is not output, it is what the unit does with dissolved minerals, and it is the one most often sold badly. An ultrasonic disc atomises water, and with it everything dissolved in that water, so on a hard supply the minerals become airborne and settle as a fine white film on whatever is nearby. Two answers exist and we build both: a demineralisation cartridge in the tank, which is a consumable with a real working life, or a scented build run on distilled water in markets where the supply is known to be hard.
The second decision is the cleaning path, which is an engineering decision long before it is a marketing one. Standing water at room temperature grows biofilm, and a tank with oil residue in it grows it faster, so the honest interval is every five to seven days in continuous use and every three to four days where a scent is run daily. A tank a hand cannot reach into is a tank that never gets cleaned properly, which is why the openings on this range are sized for a hand and a brush rather than for a photograph.
The third is the control loop. A fixed mist step ignores the room entirely, so a sealed room overshoots while a draughty one never arrives, and a scented room that overshoots is a room that smells wrong. A humidistat with a stated target band, fed by a sensor calibrated at the factory and re-checkable by the buyer with an ordinary hygrometer, is the difference between a product that holds a number and one that merely runs. The WL-AH04D (PRO) packs 80 units to a carton, carries 12 months of warranty cover and a 20-30-day stated lead time, and draws 2.0 W on the high step.
Three deployment records from the Office Aroma Humidifier Top Fill programme, each with the conditions that shaped it. Site detail is kept because it is the part that transfers: the water, the ceiling, the rota and the complaint are what decide whether a unit stays in service, and none of them appear on a specification sheet.
Deployment: A wine lodge across the Douro with a tasting room and a small hotel above it
Timing: One year from June 2025
The tasting room is the difficult one: the whole point of it is aroma, and adding a scented mist would be vandalism. Above it, the six hotel rooms run a light scent on a schedule. The two programmes share one model family and one app, and the tasting room's units are simply configured with the tray empty and the light off. A buyer with a mixed estate should be specifying configuration, not hardware, and this is the clearest example we have of it.
Deployment: A business process outsourcing floor with 400 agents on rotating shifts, air conditioning 24 hours
Timing: One year from January 2025
Twenty-four hour air conditioning across three shifts is the harshest duty cycle in this list, and the failure mode was predictable: units that were never cleaned. The programme that survived had a published cleaning interval of five days, a neck wide enough for a hand, and a cleaning rota attached to the shift handover rather than to a person. Eighty units went in; the rota, not the hardware, is why they are still running.
Deployment: A converted warehouse hosting a 90-desk coworking floor with exposed brick and no ducted humidification
Timing: Eleven months from February 2025
The operator wanted scent in the entrance and nothing at the desks, which is a split most single-unit programmes cannot serve. Six units were grouped on one app so the reception pair runs a scent step and the floor units run water only. The static complaints on the window-side carpet tiles stopped appearing in the monthly survey after the third month, and the reception scent became a line in the member onboarding email rather than a topic in the complaints channel.
The pattern across all three is that the deciding factor was never peak output. It was whether the tank lasted a full shift, whether the oil could be refilled inside the round, and whether anyone complained about the smell or the dust. Those are the questions we ask before quoting. The WL-AH04D (PRO) packs 80 units to a carton, carries 12 months of warranty cover and a 20-30-day stated lead time, and draws 2.0 W on the high step.
Four placement patterns cover most of the enquiries we see for this category. The useful observation is that each one is answered by configuration and placement rather than by buying a larger unit, which is the default reflex and usually the wrong one.
| Scenario | Room or site | What the site needs | What the unit does |
| SC04-RECEPTION | Entrance desks and waiting areas judged in the first ten seconds | A consistent first impression that does not depend on who is on shift | A burst mode runs the scent for thirty minutes either side of opening, then drops to a maintenance step nobody has to remember. |
| SC06-GUESTROOM | Turned around inside a fixed housekeeping window, twelve rooms to a round | A fill and a scent refresh inside the minutes the room already gets | Top fill from a jug at the bedside and a tray filled without removing the lid, so both tasks sit inside the existing round rather than adding to it. |
| SC08-SHOPFLOOR | Retail floors where the scent is part of how the brand is remembered | One scent across the floor, present at the door and not at the till | Two output levels by zone, with the entrance pair on a higher scent step than the interior, because the dose that works at a doorway is too much ten metres in. |
| SC10-GIFT | Boxed sets bought to be given, where the packaging carries the decision | A box that survives the shelf and a manual in the buyer's language | A gift configuration with an oil starter set, printed artwork and a multilingual leaflet, packed to a drop-test standard rather than to a catalogue photograph. |
Two of these four are decided before the unit is switched on: whether the tank lasts the interval the site can actually service, and whether the scent level is one the room will accept. For this configuration that means 12.2 mL per hour at 22.0 dB, holding 21.3 hours per fill and 7.7 hours of scent across a 10 sq m (104 sq ft) room.
Buying direct changes three things that no catalogue can show. The first is the bill of materials. A trading company quotes a price; a factory can tell you which disc, which seal and which tray is inside the unit, and what each of them costs to replace. That matters more here than in most categories, because the parts that wear are the parts that meet the oil, and they are the parts that decide whether the product is still in service in March.
The second is what happens when something goes wrong at the destination. A defect that traces to a single component is a component we stock, and it rides in the next container at the cost of the part rather than at the cost of a replacement unit. A distributor who cannot supply a seal or a pad loses the next appliance order along with the goodwill.
The third is the ability to say no. We will decline an ultrasonic build for a hard-water market without the cartridge, and we will decline a resin-heavy oil programme on a chassis with standard silicone seals, because both configurations produce a return rate rather than a reorder. A factory that can change the build is the only kind of supplier that can give that answer honestly. The WL-AH04D (PRO) packs 80 units to a carton, carries 12 months of warranty cover and a 20-30-day stated lead time, and draws 2.0 W on the high step.
Market access for this product is mostly a documentation exercise, and the mapping is stable. Europe wants the CE technical file, an EMC report and IEC 60335-1. North America adds FCC documentation for the digitally controlled models. Japan and Korea issue against PSE and KC, Australia and New Zealand against RCM, and all four want the certificates to name the model being shipped.
The second thing worth knowing is what a certificate does not cover. It does not cover the scent, and a hospitality or childcare buyer will ask about the oil before it asks about EMC. We hold the IFRA statement, the allergen declaration and the MSDS per blend, plus a flash point figure for the transport classification, and those four are the documents that most often decide a hotel or clinic order.
The third is the battery and oil overlay together. Where a cell is fitted and an oil set ships in the retail box, both sit on top of the appliance documentation and each adds a step at freight booking. For a buyer shipping to several markets at once, the cheapest route is to declare the full destination list and the full oil list at quotation stage so the documentation is raised once, in one package, rather than market by market as each order lands. For this configuration that means 12.2 mL per hour at 22.0 dB, holding 21.3 hours per fill and 7.7 hours of scent across a 10 sq m (104 sq ft) room.
Three numbers decide whether this line works for a distributor, and the first one is not the unit price. Freight is the variable most buyers undercount: at 0.112 cubic metres per master carton of 80 units, a 20 ft container takes about 189 cartons, or roughly 15,120 units, and a 40 ft container about 416 cartons, or roughly 33,280 units. Those are volume figures before palletisation and loading losses, so a buyer should treat them as an upper bound.
The second number is the consumable. A misting disc is a wearing part with a service life measured in months of continuous use rather than years, and hard water shortens it considerably. Pads and cartridges sit on top of that, and where the programme ships oil, the oil is the fastest-moving line of the three. We suggest one spare disc per twenty units, one cartridge per unit where the water is hard, and a pad set per unit per year, and all of them ride in the same container as the appliances.
The third is the cost of a return. In this category returns split roughly evenly between mineral dust and a scent the room did not want, and both are prevented at specification stage rather than by a better returns process. For this configuration that means 12.2 mL per hour at 22.0 dB, holding 21.3 hours per fill and 7.7 hours of scent across a 10 sq m (104 sq ft) room.
What order size does Wanlin accept for a first aroma humidifier shipment?
200 units per SKU on standard builds, 300 where a custom colour or private-label packaging is involved, and several models may share one container provided each SKU clears its own minimum. For a buyer testing the category for the first time, a mixed container is the lower-risk route and is the one we recommend over a single-SKU container on an unproven model.
Is the scent too strong for a bedroom, and can it be switched off?
Scent is the most common cause of a unit being unplugged, so this range treats it as a setting rather than a feature. WL-AH04D offers two steps, and the scent is weak by design because the room is a metre away, and the tray can be left empty entirely, which is what most nurseries, shared offices and clinical rooms specify. A bedroom on the low step sits well under anything a neighbour would notice, and the light, flame-effect led behind a frosted shell, switchable to a fixed warm tone, switches fully off.
Will an ultrasonic aroma humidifier put mineral dust on dark furniture?
On hard water, yes, unless the build deals with it. The disc atomises the water and everything dissolved in it, and the minerals settle as a white film. For WL-AH04D-PRO the answer built into the specification is cartridge not fitted at this size; distilled water is the answer. Where a buyer wants the question removed entirely, running on distilled water removes it without any cartridge.
What documentation comes with an aroma humidifier shipment for customs?
CE technical file, RoHS and REACH declarations, an EMC report and the IEC 60335-1 appliance safety report as standard, plus UN38.3, IEC 62133 and MSDS on any build carrying a cell, and FCC for the digitally controlled models going to North America. Where oil ships with the unit: an IFRA statement of conformity, an allergen declaration, an MSDS per blend and the flash point figure that decides transport classification. Every document names WL-AH04D rather than a family, which is what a customs officer checks.
Is private label available across the aroma humidifier range?
Across the whole range, including housing colour, logo, retail artwork, manual language, the accessory kit and the gift-box configuration. Most of it works inside existing tooling, so it does not add engineering time. What it does add is a decision about consumables, and we raise that early because the cartridge and pad choices affect the return rate more than any artwork decision does.
What is the cleaning routine, and how much staff time does it take?
Five to seven days in continuous use, or three to four where a scent runs daily, with a dry-out before any period of storage. The routine takes under two minutes on this chassis because the tank opening is wide enough for a hand and a brush, which is deliberate. A narrow-neck tank takes longer, gets cleaned less often, and eventually gets replaced - which is the real cost of a cheap moulding. Where a Bangladesh supply is hard the interval shortens rather than lengthens, and we would rather say that at quotation stage than have a buyer discover it from a complaint.
What happens if a unit fails inside the warranty period?
12 months on WL-AH04D against manufacturing defect. In practice most failures outside the warranty period are a worn disc, a scaled cartridge or a seal that has met the wrong oil rather than a faulty appliance, which is why we stock all three as separate lines and ship them with the units. A distributor who can supply the part keeps the customer.
What is the timeline from sample approval to a shipped container?
From approved sample to a shipped container, 20-30 days for first production plus the freight booking step, which is longer on battery builds because of the cell documentation and on any order carrying oil because of the transport classification. Sampling itself is 5 to 7 working days on an existing specification. We put the production figure on the proforma invoice so it is a commitment rather than an estimate.
This is a programme for buyers who intend to reorder. The first order is rarely the profitable one for either side; what makes it worthwhile is a range that can be relisted next season without a new test round, a spares line that keeps customers, and a consumable that brings them back.
It suits distributors building an air-treatment or home-fragrance shelf, brand owners who want a chassis they can put their own artwork on, gift and fragrance companies planning an oil line alongside the appliance, hospitality groups standardising across several properties, and cross-border sellers who need prep done before the container moves.
It suits less well anyone whose only criterion is the lowest unit price, because the price difference between a well-built unit and the cheapest one on the market is smaller than the cost of the returns it prevents, and in this category the returns arrive as swollen seals and filmed discs rather than as dead appliances. The WL-AH04D (PRO) packs 80 units to a carton, carries 12 months of warranty cover and a 20-30-day stated lead time, and draws 2.0 W on the high step.
The cleanest first orders we see share one habit: the buyer declares the destination list and the oil list at quotation stage. Certificates, manuals, plugs and transport classification all follow from those two lists, and raising them once as a package costs far less than raising them market by market as each order lands.
After that the sequence is ordinary. Sample evaluation first, on the actual specification rather than a similar one, with the buyer measuring mist output by a weighed run, run time per fill at the low step, oil use over a known number of hours, and noise at one metre in a quiet room. Then the proforma invoice, which carries the stated lead time and the packing list rather than leaving them open. Then production, then booking.
The one step buyers skip and regret is the spares decision. Adding a spare disc per twenty units, a cartridge per unit where the water is hard and a pad set per unit per year costs almost nothing on a first container and prevents the top-up shipment that otherwise arrives in the middle of the season. On the WL-AH04D (PRO) the figures worth carrying into the next order are the 260 mL tank, the 7.7 hours of scent per oil fill, and the 22.0 dB reading on the sleep step.
If there is one thing to take from this page, it is that the oil path and the water answer are the two that decide the return rate, and both can be checked before an order is placed. Lift the tray on a sample and look at what the oil touches, and put the unit on the water it will actually be sold with.
Everything else - output, coverage, run time, oil use, documentation - is measurable and published here so it can be verified rather than taken on trust. Where the answer depends on the room we say so rather than quoting a number that only holds in a laboratory.
Wanlin supplies this range as a manufacturer and is open to partnership with distributors, brand owners, fragrance and gift companies, hospitality and facilities buyers, cross-border sellers and export traders. Samples, specification sheets and certificates are available on request. On the WL-AH04D (PRO) the figures worth carrying into the next order are the 260 mL tank, the 7.7 hours of scent per oil fill, and the 22.0 dB reading on the sleep step.
Published by: Wanlin Manufacturing Group, MistAirHome Export Division
Published on: September 30, 2026
Data sources: in-house factory testing + misting disc and oil tray specifications + certification and oil declaration files + partner deployment records
Company address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
References: factory quality manual + third-party test reports + customer shipment records
Contact: Mistairhome@163.com / +8613261677119 / https://www.mistairhome.com
